For the screw of the bubble film machine, it is very important to do a good job in related maintenance work. So how to do a good job in the maintenance of the screw of the bubble film machine?

The screw of the bubble film machine should be properly handled to prevent deformation when it is removed from the barrel due to some reasons. If it is not installed back into the barrel for a long time, the screw must be hung vertically to prevent collision, bending, and permanent deformation. Both the barrel and screw surfaces should be coated with anti rust oil for protection.

When feeding the bubble film machine into the hopper, it must be kept clean and strictly prevent metal debris, sand, stones, and small tools from entering the feeding port to prevent damage to the machine barrel and screw. If any abnormal noise is found during operation, the machine should be stopped immediately for processing.

Therefore, these details should be taken into account when maintaining the screw of the bubble wrap machine.

For more information about bubble wrap machines, please visit: http://www.wzzhengnanjx.com/